| Product/产品 | Flash PoiUC, C (PMCC)/闪点 | Viscosity at 25 C cPs/粘度 | Specific Gravity @ 21 C (g/cm)/密度 | Waer Solubility/水溶性 | Calculated OH Number/羟值, MgKOH/g | Product Description/产品描述 |
| UC CAT 33 | >110 | 125 | 1.03 | soluble/可溶 | 560 | Strong urethane reaction catalyst for multi-purpose use; 33% triethylene diamine and 67% dipropylene glycol liquid. 多用途的强凝胶催化剂；33％三乙烯二胺，67％二丙二醇 |
| UC CAT A1 | 71 | 4 | 0.9 | soluble/可溶 | 251 | Strong urea reaction catalyst; 70% bis (2-Dimethylaminoethyl) ether diluted with 30% dipropylene glycol. 强发泡催化剂，70％双（2－甲基乙氨基）醚；30％二丙二醇。 |
| UC CAT AS-1 | 65 | 61 | 1.04 | soluble/可溶 | 476 | Delayed-action urea reaction catalyst; acid-blocked UC CAT A1 catalyst. 延迟型发泡催化剂；酸封闭的A1。 |
| UC CAT D60 | 39 | 0.8 | p. soluble/部分可溶 | 0 | UCCAT D60 catalyst is an amine catalyst used to improve surface cure in a variety of flexible and rigid foam applications. UC CATD60催化剂是用于提高软泡与硬泡表面固化的胺类催化剂。 |
|
| UC CAT 8154 | 110 | 160 | 1.04 | soluble/可溶 | 548 | Delayed action gelation catalyst; UC CAT Crystalline-based. Less corrosive than other delayed-action catalysts. 延迟型凝胶催化剂，基于UC CAT晶体，低腐蚀性。 |
| UC CAT A601 | 84 | 183.3 | 1.09 | soluble/可溶 | 546 | Delayed action, balanced amine catalyst developed for fast demold HR molded foam systems. It provides effective balanced reactions with optimum flowability for complex parts, allowing shortened cycle time and improved productivity. 延迟型平衡胺类催化剂，用于模塑高回弹泡沫快脱模体系，提供了有效的平衡反应以及较好的流动性，缩短了产品周期提高产量。 |
| UC CAT A608 | 65 | 227 | 1.1 | soluble/可溶 | 569 | Delayed action, balanced amine catalyst with fast post curing developed for MDI based HR molded foam systems. It provides optimum flowability 延迟型平衡胺类催化剂，加快体系后段熟化，用于MDI模塑高回弹泡沫体系，提供了有效的平衡反应以及较好的流动性。 |
| UC CAT A225 | 85 （185） |
1.067 | 5.9 | UC CAT A225 may be used as a rapid demold catalyst for HR molded foam. As the sole amine catalyst, it effectively balances the reactions governing density reduction and urethane curing, providing optimum flowability in complex parts, while also allowing decreased demold times. UC CAT A225可被用作高回弹模制泡沫快速脱模催化剂。它有效地平衡反应、降低密度和熟化，从而提供在复杂模具内最佳的流动性，同时还允许减少脱模时间。 |
||
| UC CAT A300 | 104 | 9.6 | 1.108 | soluble/可溶 | UC CAT A-300 can help in the production of your molded polyurethane foams. This liquid, water-soluble tertiary amine composition promotes the gelation reaction during the production process. UC CAT A-300可以帮助生产的模塑聚氨酯泡沫。易溶于水。有助于促进生产过程中的凝胶反应。 |
|
| UC CAT A400 | 93 | 140 | 1.15 | soluble/可溶 | UC CAT A-400 lets you reap the benefits of extended pour times and increased open foam. UC CAT A-400对于持久浇注时间和增加开孔泡沫结构有良好作用 |
|
| UC CAT 602 | 103 | ~80 | 0.96 | soluble/可溶 | 310 | Non-emissive (NE) amine developed for use in cold cure and hot cure flexible molded polyurethane foam systems. It binds chemically iUCo the polyurethane foam matrix while maiUCaining or improving foam properties in molded foam systems. 在低模温和高模温的模塑软泡中使用的非散发性胺催化剂，化学结合到聚氨酯泡沫基体中，同时保持甚至提高泡沫性能。 |
| UC CAT ZE1070 | 168 | ~1,200 | 1.06 | soluble/可溶 | 730 | Non-emissive (NE), urethane reaction catalyst for MDI and TDI flexible molded foam. Meets Thermodesorption Method VDA 278 for VOC and FOG. 非散发性凝胶催化剂，用于MDI和TDI的模塑软泡中，能满足VDA278等散发性测试要求。 |
| UC CAT ZE210 | 134 | 320 | 1.03 | soluble/可溶 | 620 | Non-emissive (NE) balanced urethane / urea reaction catalyst for MDI and TDI flexible molded foam. Meets Thermodesorption Method VDA 278 for VOC and FOG. 非散发性平衡催化剂，用于MDI和TDI的模塑软泡中，能满足VDA278等散发性测试要求。 |
| UC CAT ZE300 | 124 | 9.2 | 0.91 | soluble/可溶 | 276 | Non-emissive (NE) urea reaction catalyst for MDI and TDI flexible molded, semi-flexible and slabstock foams. Meets Thermodesorption Method VDA 278 for VOC and FOG. 非散发性发泡催化剂，用于MDI和TDI的模塑软泡、半软泡以及软质块泡中，能满足VDA278等散发性测试要求。 |
| UC CAT ZE10 | 118 | 12 | 0.95 | 295 | ZF10 is blowing catalyst efficiency and low odor, used in the preparation of low-odor foam. ZF10是高效低气味发泡催化剂，应用于制备低气味泡沫。 |
|
| UC CAT ZE500 | >200 | 1500 | 1.04 | soluble/可溶 | 280 | Non-emissive (NE) urethane promoting catalyst for all types of slabstock foam. 非散发性凝胶催化剂，适用于所有类型的软质块泡 |
| UC CAT ZE50 | 141 | 17 | 0.89 | 229 | UC CAT ZR-50 is a low-odor gel catalyst, providing excellent balance of performance UC CAT ZR-50是低气味凝胶催化剂，提供优良的平衡性能 |
|
| UC CAT 15 | 88 | 5 | 0.86 | soluble/可溶 | 282 | Isocyanate-reactive, balanced urethane / urea reaction catalyst. Promotes surface cure. 反应性平衡催化剂，提高表面熟化 |
| UC CAT DPA | 284 | 145 | 1 | 514 | Low emission catalyst with good gellation and flowability. 低排放的催化剂具有良好的凝胶性和流动性。 |
|
| UC CAT T-12 | >204 | 125 | 1.03 | insoluble/不溶 | 0 | Strong urethane reaction catalyst; dibutyltindilaurate. 强凝胶催化剂，二丁基二月桂酸锡 |
